Tenyetseheng PCB

Fumax - Tsepamisa maikutlo ho Boto ea Potoloho ea Potoloho le Lits'ebeletso tsa PCB Assembly Turnkey, Boleng bo phahameng, Litšenyehelo tse tlase, Ho tlisa kapele le ho laela habonolo bakeng sa bareki lefats'eng lohle.

Rigid PCBpic2

Sehlahisoa sa PCB e thata eo Fumax e ka fanang ka eona

* PCBs le le dikarolo ho fihlela ho 48

* Alu konokono, hape lipoleiti-ka

* Ultra-Qetellong

* Litšoantšo tsa Laser Direct (LDI)

* Microvias ho tloha 75µm

* O foufetse- mme o patiloe-Vias

* Laser-Vias

* Via polaka / Stacking

Rigid PCBpic1

Bokgoni

* Lera (le dikarolo 2-40,) ;

* PCB boholo (Min. 10 * 15mm, Max.508 * 889mm, boholo

* Qete boto botenya (0.21-6.0mm) ;

* Min botlaaseng koporo botenya (1/3 Oz (12um)) ;

* Max o qetile botenya ba koporo (6 OZ) ;

* Min mesaletsa bophara / dikgeo dipakeng, Inner lera: Karolo 2 / 2mil, kakaretso 3 / 3mil; Lera le ka ntle: Karolo ea 2.5 / 2.5mil, kakaretso ea 3 / 3mil) ;

* Mamello ea teba boholo (± 0.1mm);

* Phekolo ea bokaholimo (HASL / ENIG / OSP / ETSA MAHALA HASL / GOLD PLating / IMMERSION Ag / IMMERSION Sn ; ;

* Impedance Control mamello (± 10%, 50Ω le tlase: ± 5Ω) ;

* Mmala oa Solder Mask (o motala, o moputsoa, ​​o mofubelu, o mosoeu, o motsho.

Rigid PCBpic3

Likopo

   E thata Hatisitsoeng Potoloho Boards fana ka keketseho ea potoloho ea potoloho mme e ka fokotsa boholo le boima ka kakaretso ba boto. Ke ka hona ba bangata lik'hamphani tsa elektronike lefatšeng sebelisa liboto tsena lisebelisoa le lisebelisoa tse 'maloa tsa elektronike. Boholo ba komporo, ho itšireletsa mafung, le tlhokomelo e bonolo li etsa li-PCB tse thata sehlahisoa se loketseng lits'ebetso tse fapaneng. Li bohlokoa haholo liindastering moo likarolo li hlokang ho lokisoa, 'me li hloka ho sebetsana le khatello ea ts'ebeliso, le lithemparetjha tse phahameng.

* Electronics ea Liindasteri le Boiketsetso: Li-PCB tse thata li ka sebelisoa ho ts'ehetsa leseli le lits'ebetso tse boima tsa mosebetsi. Li-PCB tse ngata li ka sebelisoa ho fana ka impedance e laoloang le ho theha likhokahano tse patiloeng. Li-PCB tse boima li ka sebelisoa ho ts'ehetsa lits'ebetso tse amanang le matla a phahameng a motlakase le maqhubu. . Mehlala ea lits'ebetso tsa boiketsetso e kenyelletsa liroboto, balaoli ba khase le khatello, khetha le ho beha lisebelisoa, le khatello ea khatello.

* Bongaka: Le ha lisekete tse tenyetsehang li atile haholo lekaleng lena, li-PCB tse thata le tsona li na le sebaka liketsong tsa bongaka. Li sebelisoa haholo bakeng sa lisebelisoa tse kholo tse sa nkeheng. Mehlala ea tsena e kenyelletsa lisebelisoa tsa tomography, mechini ea Electromyography (EMG), le litsamaiso tsa Magnetic Resonance Imaging (MRI).

* Aerospace: Indasteri ea Aerospace e na le libaka tse thata, tse nang le mocheso o phahameng. Li-PCB tse thata li ka sebetsa hantle mona, kaha li ka etsoa ka likaroloana tsa koporo le aluminium, le laminate tse phahameng tsa mocheso. Mehlala ea lits'ebetso tsa Aerospace li kenyelletsa Liuniti tsa Matla a Thusang (APUs), lisebelisoa tsa lifofane tsa lifofane, li-converter tsa motlakase, li-sensor tsa mocheso le lisebelisoa tsa taolo ea lisebelisoa tsa tora.

* Koloi: Li-PCB tse thata li ka fumanoa likoloi tse mahareng ho isa ho tse kholo. Joalo ka lits'ebetso tsa Aerospace, li-PCB li ka hahuoa ka likaroloana tsa koporo le aluminium. Laminate tse nang le mocheso o phahameng li ka eketsoa bakeng sa ts'ireletso khahlanong le mocheso oa enjene le litšila tsa tikoloho. Li-PCB tsa likoloi le tsona li ka hahuoa ka koporo e tlotsitsoeng bakeng sa ho tšoarella ka nako e telele. Li-PCB tse thata li ka sebelisoa lits'ebetsong tse joalo ka li-converter tsa motlakase tsa AC / DC, li-Units tsa Elektroniki tsa Khomphutha (ECUs), li-sensors tsa phetisetso le mabokose a kabo ea motlakase.

Rigid PCBpic4