HDI PCB

Fumax -- Moetsi oa konteraka e khethehileng ea HDI PCBs ho la Shenzhen.Fumax e fana ka mefuta e fapaneng ea mahlale a fapaneng, ho tloha ho 4-layer laser ho isa 6-n-6 HDI multilayer ka botenya bohle.Fumax e sebetsa hantle ho hlahiseng HDI ea theknoloji e phahameng (High Density Interconnection) li-PCB.Lihlahisoa li kenyelletsa liboto tse kholo le tse teteaneng tsa HDI le liboto tse phahameng tse tšesaane tse pakiloeng ka meaho.Theknoloji ea HDI e nolofalletsa sebopeho sa PCB bakeng sa likarolo tse phahameng haholo tse kang 400um pitch BGA e nang le palo e phahameng ea li-I/O.Karolo ea mofuta ona hangata e hloka boto ea PCB e sebelisang multiple layer HDI, mohlala 4+4b+4.Re na le boiphihlelo ba lilemo tsa ho etsa mofuta ona oa li-PCB tsa HDI.

HDI PCB pic1

Mefuta e fapaneng ea lihlahisoa tsa HDI PCB eo Fumax e ka fanang ka eona:

* Mehaho ea moeli bakeng sa tšireletso le khokahanyo ea fatše;

* Micro vias tse tletseng koporo;

* Li-vias tse nyane tse pakiloeng le tse thekeselang;

* Li-cavities, likoti tse tekiloeng kapa ho sila ka botebo;

* Solder e hanyetsa ka botšo, boputsoa, ​​​​botala, joalo-joalo.

* Bophara bo fokolang ba pina le sebaka sa tlhahiso ea bongata ho pota 50μm;

* Lintho tse tlaase tsa halogen ka mefuta e tloaelehileng le e phahameng ea Tg;

* Lisebelisoa tse tlase tsa DK bakeng sa lisebelisoa tsa mohala;

* Libaka tsohle tse tsebahalang tse hatisitsoeng tsa indasteri ea potoloho lia fumaneha.

HDI PCB pic2

Tsebo:

* Mofuta oa Boitsebiso (FR4 / Taconic / Rogers / Ba bang ka Kopo);

* Lera (4 - 24 Layers);

* PCB Botenya Range (0.32 - 2.4 limilimithara);

* Theknoloji ea Laser ( CO2 Direct Drilling (UV / CO2));

* Botenya ba Koporo (9µm / 12µm / 18µm / 35µm / 70µm / 105µm);

* Min.Mohala / Sebaka (40µm / 40µm);

* Max.PCB boholo (575 mm x 500 mm);

* Mokotla o Monyane ka ho Fetisisa (0.15 mm)

* Libaka (OSP / Immersion Tin/NI/Au/Ag、Plated Ni/Au).

HDI PCB pic3

Lisebelisoa:

Boto ea High Density Interconnects (HDI) ke boto (PCB) e nang le lithapo tse phahameng ka ho fetisisa sebakeng sa yuniti ho feta liboto tsa potoloho tse hatisitsoeng tse tloaelehileng (PCB).HDI PCB e na le mela e menyenyane le libaka (<99 µm), li-passage tse nyane (<149 µm) le li-cappads (<390 µm), I/O>400, le matla a khokahanyo a phahameng (>21 pads/sq cm) ho feta tse sebelisoang. ka theknoloji e tloaelehileng ea PCB.HDI boto e ka fokotsa boholo le boima ba 'mele, hammoho le ho ntlafatsa ts'ebetso eohle ea motlakase ea PCB.Ha bareki ba batla ho fetoha, theknoloji le eona e tlameha ho fetoha.Ka ho sebelisa theknoloji ea HDI, baqapi ba hona joale ba na le khetho ea ho beha likarolo tse ngata mahlakoreng ka bobeli a PCB e tala.Ka mekhoa e mengata, ho kenyeletsoa ka pad le ho foufala ka theknoloji, ho lumella baqapi ba thepa e ngata ea PCB ho beha likarolo tse nyane le ho feta haufi.Ho fokotseha ha boholo ba likarolo le bophahamo ba molumo ho lumella I/O e ngata ho lijeometri tse nyane.Sena se bolela phetiso e potlakileng ea matšoao le phokotso e kholo ea tahlehelo ea matšoao le tieho ea ho tšela.

* Lihlahisoa tsa Likoloi

* Elektronike ea bareki

* Thepa ea indasteri

* Lisebelisoa tsa Elektronike tsa Bongaka

* Sesebelisoa sa elektroniki sa Telecom

HDI PCB pic4